Cleco DGD mPro400GC Hardware Description

4 P2174HW-EN 2017-01 en01d441_bedingt.fm, 12.01.2017
Set-Up Guide
1
1 Set-Up Guide
1.1 Controller description
The mPro400GC product line consists of three controllers; Master, Primary and Secondary.
• Primary - Controls up to sixteen (16) tools. This unit includes a servo. One (1) standard corded hand-
held or fixtured tool could directly connect. For further corded tools / fixtured spindles are Secondary
controllers required.
• Master - Controls up to sixteen (16) tools. This controller does not include a servo. For corded tools / fix-
tured spindles are Secondary controllers required.
• Secondary - Controls one (1) corded handheld or fixtured tool. Must be used with a Master or Primary
controller.
Abb. 1-1: Controller Description
Controller Order no. Controls up to
(…) tools
Servo
included
Tool compatibility
Primary mPro400GC-P 16 1 18–48 AirLB
1)
Cordless EC tool
DGD-Intelligent-Spindles (BTS Series)
2)
1) Limited to 1 tool
2) Additional Hardware necessary. For programming mark Advanced > Controller Settings > Display Mpro Button.
Master mPro400GC-M 16 – Cordless EC tool
DGD-Intelligent-Spindles (BTS Series)
3)
Secondary mPro400GC-S 1 1 18–48 AirLB
1)
c01259.png

Cleco DGD mPro400GC Specifications

General

Brand	Cleco
Model	DGD mPro400GC
Category	Controller
Language	English