29
4
Washing Instructions
1. Once the seat cover is removed, set the foam pad aside. DO NOT wash foam pad.
2. Before washing, re-attach all fastening strips.
3. Machine wash separately: cold 30C/80F, gentle cycle. DO NOT bleach. DO NOT iron.
DO NOT dry-clean. Lay flat to dry.
2. Pull up on the bottom flap and sides of
the seat cover releasing the fastening
strips. Flip the bottom flap forward so that
it hangs in front of the seat, as shown in
Figure 29.
3. Unfasten the triangular flaps and flip them
sideways so that they hang off to the side
of the seat, as shown in Figure 29.
4. Starting from the back, push down on the
sides of the seat cushion cover, loosening
the cover from the seat frame.
3
2
3
Figure 29
To Next Page
Loading...
