BNP
®
55 SUCTION BLAST CABINET Page 29
© 2019 CLEMCO INDUSTRIES CORP. www.clemcoindustries.com Manual No. 23350, Rev G, 02/19
9.0 ACCESSORIES AND REPLACEMENT PARTS
9.1 Optional Accessories
Turntables and Turntables with Tracks
WARNING
Turntable capacities are based on concentric
loading. Use solid fixturing to hold heavy parts
in place. Do not remove lift equipment until the
part is adequately supported to prevent
movement. Moving or rotating heavy,
unsupported or off-centered parts may cause
them to shift or topple, and cause severe injury.
Fixed-Base Turntable Without Bearing
Description Stock No.
20" dia. 25 lb. capacity ........................................... 12412
Fixed-Base Turntable with Bearing, 500 lb. Capacity
Figure 29
Item Description Stock No.
(-) 20" dia. assembly, 500 lb. capacity ........... 12411
1. Turntable
20" diameter 500 lb. capacity ................ 18329
2. Bearing, 1-1/2" bore .................................. 11517
3. Protector, bearing ...................................... 13479
4. Screw, 1/2-NC x 1-1/2" cap ....................... 03454
5. Washer, 1/2" lock ...................................... 03516
6. Nut, 1/2-NC hex ........................................ 03511
Figure 29
Low Profile Table and Track Assembly, 500 lb.
capacity – Figure 30
Item Description Stock No.
(-) Track and Table assembly,
as shown in Section 3.5 ........................ 24841
1. Roller ........................................................ 25023
2. Washer, 5/8 flat ........................................ 03715
3. Nut, 5/8 NF jam ........................................ 03712
Figure 30
Aluminum oxide kit, field installed, includes: light-lined
flex hose, #5 boron carbide nozzle, black-rubber cabinet
curtains with grommets and curtain hardware. Does not
include rubber reclaimer liners.
for BNP-55 w/ 300 reclaimer .............................. 12953
for BNP-55 w/ 600 reclaimer .............................. 14129
Aluminum oxide kit, factory installed, includes: #5 boron
carbide nozzle, black-rubber cabinet curtains with
grommets and curtain hardware. Does not include
rubber reclaimer liners.
for BNP-55 w/ 300 and 600 cfm reclaimers ....... 12954
Rubber cabinet curtains, BNP-55, black
Curtain set, w/ mounting hardware .................... 23530
Back curtain ........................................................ 14318
Front curtain ....................................................... 14319
Door curtain, 2 required ..................................... 14320
Rubber cabinet curtains, BNP-55, white
curtain set ........................................................... 23540
Time delay door locks ............................................ 24163
Lock pins (pkg of 25) for twist-on hose couplings .... 11203
Safety cable, for 1/2" to 1-1/4" OD hose ............... 15012
Adjusting tool, BNP air jet ...................................... 19041
Manometer kit ........................................................ 12528
Tumble basket, 2-gallon ........................................ 12227
Anti-fatigue floor-mat, 2 ft x 3 ft for front of cab. .... 24744
Armrest assembly .................................................. 24900
Armrest assembly, replacement ............................ 24899
Noise-reduction arm port covers, pair ................... 29455
1
6
5
3
4
2
1
2
3
2
To Next Page
Loading...
Need help?
General