5.4.
DELETING TRANSMITTERS
To delete all users from your Receiver, press its program button and hold it down for 10
seconds; you will hear 6 double beeps indicating the memory has been erased.
If you only wish to erase one particular user, you must use a compatible programmer.
5.5.
ANTISPOOFING SYSTEM
When the receiver detects that there are 2 transmitters with the same code functioning in
the system, it puts them on “Reserve” in the memory card and they stop working. For this
transmitter to work again it must be set to “Active”, editing the TM400 card with a
compatible programmer.
To avoid issues, it is recommended this code be left on “Reserve” and the original
transmitter code changed for a new one authorizing it with the receiver.
6.
OPTIONAL ACCESSORIES
• PT Programmers
7.
TECHNICAL CHARACTERISTICS
To Next Page
Loading...