Clevo M540SE - Removing the Bluetooth Module

Disassembly
2 - 16 Removing the Bluetooth Module
2.Disassembly
Removing the Bluetooth Module
1. Turn off the computer, remove the battery (page 2 - 5), the component bay cover (page 2 - 9) and remove the
WLAN module (page 2 - 9).
2. The Bluetooth module is located under the Wireless LAN Module.
3. Remove the screw and turn it over.
4. Carefully separate the Bluetooth module from the connector
and disconnect the cable .
5. Lift the Bluetooth module
(Figure 12d) up and off the computer.
Figure 12
Bluetooth Removal
a. Remove the WLAN and lo-
cate the bluetooth.
b. Remove the screw.
c. Disconnect the cable and
the connector.
d. Lift the Bluetooth up off the
socket.
1
2
3 4
5
a.
c.
d.
1
2
4
b.
3
5

5. Bluetooth Module
•1 Screw