Clevo M540SE - Removing and Installing the Processor

Disassembly
2 - 12 Removing and Installing the Processor
2.Disassembly
Removing and Installing the Processor
Processor Removal Procedure
1. Turn off the computer, remove the battery (page 2 - 5) and the component bay cover (page 2 - 9).
2. The CPU heat sink will be visible at point on the mainboard.
3. Remove screws
- (Figure 8b) from the heat sink in the order indicated.
4. Carefully lift up the heat sink (Figure 8c) off the computer.
1
2 4
5
Figure 8
Processor Removal
a. Remove the cover and
Iocate the heat sink.
b. Remove the screws in
the order indicated.
c. Remove the heat sink.

5. Heat Sink
•3 Screws
a.
c.
b.
1
5
4
3
2
1
M550SE M540SE