Disassembly
Removing and Installing the Processor 2 - 13
2.Disassembly
5. Turn the release latch towards the unlock symbol , to release the CPU (Figure 9a).
6. Carefully (it may be hot) lift the CPU up out of the socket (Figure 9b).
7. See page 2 - 14 for information on inserting a new CPU.
8. When re-inserting the CPU, pay careful attention to the pin alignment, it will fit only one way (DO NOT FORCE IT!).
6
7
Figure 9
Processor Removal
(cont’d)
a. Turn the release latch to
unlock the CPU.
b. Lift the CPU out of the
socket.
6
a.
7
b.
Caution
The heat sink, and CPU area in
general, contains parts which are
subject to high temperatures. Al-
low the area time to cool before re-
moving these parts.
Unlock
Lock
6
7. CPU
To Next Page
Loading...
