Clevo N141ZU - Removing the CCD

Disassembly
Removing the CCD 2 - 17
2.Disassembly
Removing the CCD
1. Turn off the computer, turn it over to remove the keyboard (page 2 - 5) and battery (page 2 - 6).
2. Lift up the inner frame and run your fingers around the inner frame of the LCD panel at the points as indicated by
the arrows - (Figure 11a).
3. Lay the computer down on a flat surface with the top case up forming a 130 degree angle. Carefully lift and
remove the LCD front cover upwards (Figure 11b).
1
4
5
b.
a.
1
5
4
2
3

5. LCD Front Cover
Figure 11
CCD Removal
a. Run your fingers around
the inner frame of the
LCD panel at the points
indicated by the arrows.
b. Lay the computer down
on a flat surface with the
top case up forming a
130 degree angle. Lift
the LCD front panel up-
wards.