Disassembly
2 - 18 Removing the CCD
2.Disassembly
Removing the CCD
1. Turn off the computer, turn it over to remove the battery (page 2 - 5).
2. Lay the computer down on a flat surface with the top case up forming a 90 degree angle. Carefully remove the
rubber covers - and screws - .
3. Run your fingers around the inner frame of the LCD panel at the points as indicated by the arrows - (Figure
12a).
4. Push the LCD front cover upwards before carefully lifting it up (Figure 12b).
5. Remove the LCD front cover (Figure 12c).
1 2 3 4
5 8
9
9
c.
b.
a.
1
2
9
7
8
9
3
4
5
6
9. LCD Front Cover
• 2 Screws
Figure 12
CCD Removal
To Next Page
Loading...
