Storage Devices, Mouse, & Audio
Audio Features 2 - 5
2
Setup for Audio Recording
To record audio sources on your computer at optimum quality follow the instruc-
tions below:
1. Go to the
Control Panel
.
2. Click Realtek HD Audio Manager (Hardware and Sound), or right-click the
taskbar icon and select Sound Manager.
3. Click Microphone Effects (tab) in Microphone (tab), and then click to select
Noise Suppression (button), or adjust the Recording Volume level to around 60,
to obtain the optimum recording quality.
4. Click OK to close the control panel and save the settings.
Device Advanced
Settings
For the purposes of re-
cording it is recommend-
ed that you enable
“Separate all input
jacks as independent
input devices” in De-
vice advanced settings.
This will help prevent a
situation where the inter-
nal microphone seems to
be disabled, or where
sound can still be heard
from the speakers even
though the headphones
are plugged into the
headphone jack.
Figure 2 - 3
Realtek Audio
Manager - Recording
Setup
Sound Blaster Cinema 3 Audio
Note that you will need to install the
Sound Blaster Cinema 3 audio appli-
cation in order to get maximum audio
performance. See
“Sound Blaster
Cinema 3” on page 6 - 26.
To Next Page
Loading...
