Clevo P650SE - Page 41

Disassembly
Removing and Installing the 3G/SATA Module 2 - 17
2.Disassembly
SATA Module Removal Procedure
1. Turn off the computer, remove the battery (page 2 - 6).
2. Locate the module, it is visible at point
(Figure 12a).
3. Remove the screw from the module
(Figure 12b).
4. The module will pop-up
(Figure 12c).
5. Lift the module up and off the computer
(Figure 12d).
Figure 12
SATA Module
Removal
a. Locate the module.
b. Disconnect the cables and
remove the screw.
c. The module will pop-up.
d. Lift the module up off the
socket.
1
2
3
3
a.
c.
1
2
3
b.
3
d.

3. SATA Module
•1 Screw