Clevo P650SE - 3 G;SATA Module Removal and Installation

Disassembly
2 - 16 Removing and Installing the 3G/SATA Module
2.Disassembly
Removing and Installing the 3G/SATA Module
3G Module Removal Procedure
1. Turn off the computer, remove the battery (page 2 - 6).
2. Locate the module, it is visible at point
(Figure 11a).
3. Carefully disconnect the cables & , and then remove the screw from the module
(Figure 11b).
4. The module will pop-up
(Figure 11c).
5. Lift the module up and off the computer
(Figure 11d).
Figure 11
3G Module Removal
a. Locate the module.
b. Disconnect the cables and
remove the screw.
c. The module will pop-up.
d. Lift the module up off the
socket.
1
2
3
4
3
5
a.
b.
1
2
5
c.
3
4
5
d.

5. 3G Module
•1 Screw