Clevo W270EGQ User Manual

E - 46 3G Settings (Windows 8)
Windows 8
Windows 8
EM820W 3G Module PIN Code & Power-Saving
Note that there may be some issues when a PIN Code is set for the EM820W 3G module (if you are unsure of
your module version contact your distributor/supplier) in Windows 8, Mobile Broadband has been turned off,
and the system has resumed from a power-saving state. To prevent any issues it is recommended that you
simply do not enable a PIN for the EM820W 3G module. The following provides instructions for disabling
the PIN code; for specific instructions on resolving the issue where “Insert a SIM” appears in the connection
see “Resolving the “Insert a SIM” issue with the 3G Module (Windows 8)” on page 8 - 19.
Disabling a PIN code for a 3G Module
1. Go to the Charms Bar.
2. Select Settings and then click the WiFi icon.
3. Right-click the 3G connection and select View connection properties.
Figure E - 42 - WiFi Settings (Charms Bar) & Right-Click Connection to View Properties

Clevo W270EGQ Specifications

General

Memory Slots	2
Maximum Memory	16GB
Display Size	17.3 inches
Operating System	Windows 7 / 8
Optical Drive	DVD Super Multi
Wireless LAN	802.11 b/g/n
Bluetooth	Bluetooth 4.0
USB Ports	2 x USB 3.0, 2 x USB 2.0
Processor	Intel Core i7-3630QM
Storage	2.5" SATA HDD/SSD
Graphics Memory	2GB
Display Resolution	1920x1080 pixels
Weight	3.0 kg
Audio	High Definition Audio
LAN	10/100/1000 Mbps
Card Reader	Multi-in-1 card reader
Webcam	2.0MP
Battery	6-cell Lithium-Ion
Dimensions	413 x 277 mm