Clevo W370ET - Removing the Optical (CD;DVD) Device

Disassembly
2 - 6 Removing the Optical (CD/DVD) Device
2.Disassembly
Removing the Optical (CD/DVD) Device
1. Turn off the computer, and turn it over and remove the battery (page 2 - 5) and remove the component bay cover
(page 2 - 5).
2. Remove the screw , and use a screwdriver to carefully push out the optical device
at point .
3. Reverse the process to install the new device.
Figure 2
Optical Device
Removal
a. Remove the screw and
push the optical device
out of the computer.
1
3
2

3. Optical Device
•1 Screw
a.
1
2
3