Need help?Do you have a question about the Clevo W370ET and is the answer not in the manual?
Follow basic safety precautions to reduce risk of fire, electric shock, and injury.
Computer requires approved power adapter. Ensure steady power supply. Check plug type.
Use only specified batteries. Do not use damaged batteries. Do not repair battery packs.
Details processor, core logic, BIOS, LCD, memory, video, storage, and other system components.
Important safety reminders to avoid personal injury and computer damage during service.
Procedure for safely removing the notebook computer's battery.
Procedure for removing the primary and secondary hard disk drives.
Detailed steps for removing and installing the CPU, including heat sink management.
Instructions for carefully removing the keyboard and disconnecting its ribbon cable.
Guides for removing RAM modules from both under-keyboard and component bay locations.
High-level overview of the W370ET/W350ET system architecture and component connections.
Circuit diagram for the Ivy Bridge processor, focusing on DMI, PEG, and FDI interfaces.
Circuit diagram for the Ivy Bridge processor, detailing CLK, MISC, and JTAG signals.
Circuit diagram for the Ivy Bridge processor, detailing DDR3 memory interfaces.
Circuit diagram for the Ivy Bridge processor, illustrating power delivery and SVID signals.
Circuit diagram for the Ivy Bridge processor, detailing graphics and DDR3 power rails.
Circuit diagram for the Ivy Bridge processor, showing ground (VSS) pin assignments.
Circuit diagram for the Ivy Bridge processor, detailing reserved pins and configuration straps.
Schematic for DDR3 SO-DIMM slot A, showing memory pin connections and power.
Schematic for DDR3 SO-DIMM slot B, showing memory pin connections and power.
Schematic for DDR3 SO-DIMM slot A, showing memory pin connections and power.
Circuit diagrams for the LCD panel connector, inverter, and CRT interface.
Schematic detailing the PCI-Express interface for the VGA graphics card.
Circuit diagram illustrating the VGA Frame Buffer interface and its components.
Prerequisites and steps required before starting the BIOS update process.
Instructions on how to find and download the correct BIOS version from the manufacturer's website.
Detailed instructions on using flash tools from the DOS prompt to update the BIOS.
To Next Page
General
