Clevo W510LU - Removing the CCD Module

Disassembly
Removing the CCD Module 2 - 15
2.Disassembly
Removing the CCD Module
1. Turn off the computer, remove the battery (page 2 - 5).
2. Turn the computer over, run your fingers around the inner frame of the LCD panel at the points indicated by the
arrows
- (Figure 10a).
3. Carefully remove the LCD panel off (Figure 10b).
4. Disconnect the cable (Figure 10c).
5. Remove the CCD module off (Figure 10d).
Figure 10
CCD Module
Removal
a. Run your fingers around
the inner frame of the
LCD panel at the points
indicated by the arrow.
b. Remove the LCD panel.
c. Disconnect the cable.
d. Remove the CCD mod-
ule.
1
3
4
5
6
5
b.
a.
2
3
1
6
d.
c.
4
2

4. LCD Front Panel
6. CCD Module