Clevo X7200 - Page 39

Disassembly
Removing the Keyboard 2 - 15
2.Disassembly
Keyboard Shielding Plate Insertion
1. When re-inserting the keyboard shielding plate make sure you insert it by sliding it into position at an angle as
illustrated by arrow below, and press it down into position (Figure 11a).
2. Secure the plate with screws - (Figure 11b).
Figure 11
Keyboard
Shielding Plate
Insertion
a. When re-inserting the
keyboard shielding
plate make sure you
insert it by sliding it
into position at an an-
gle as illustrated by
arrow below, and
press it down into po-
sition.
b. Secure the plate with
screws.

•3 Screws
1
2
3
5
1
4
2
3
5
a.
b.