Clevo X7200 - Page 46

Disassembly
2 - 22 Removing the Hard Disk(s) from the Primary HDD Bay
2.Disassembly
Inserting the Primary Hard Disk(s)
1. Insert the HDD(s) into the HDD case as illustrated (Figure 17a). *Make sure the cable connectors are
facing towards the gap at the rear of the case.
2. Insert screws - to secure the hard disk(s) in the case (Figure 17b).
1
2
3
6
2
3
3
4
5
6
3
4
5
6
a.
b.
2
1
1
2
Figure 17
Inserting the
Primary Hard
Disk(s)
a. Insert the HDD into
the case.
b. Insert screws to se-
cure the hard disk(s)
in the case.

1. Hard Disk
2. Hard Disk Case
•4 Screws