Modules
7 - 12 Wireless LAN Module
7
Wireless LAN Module
If you have included an
Intel
®
Wireless LAN
module or
3rd Party
802.11b/g/n
WLAN module
in your purchase option, make sure that the Wireless LAN module
is on b
efore installing the driver.
Use the
Fn + F11 key combination
or Touch Sensor Instant Key
to toggle power
to the Wireless LAN module.
When the WLAN module is powered on, the touch sen-
sor LED will be
highlighted
and the indicator will briefly be displayed.
Make sure you install the drivers in the order indicated in
Table 4 - 1, on page 4 - 3
.
The operating system is the default setting for Wireless LAN control in Windows 7.
Note that you need to install both the WLAN & Bluetooth drivers for the WLAN & Blue-
tooth Combo module.
Wireless Device
Operation Aboard
Aircraft
The use of any portable
electronic transmission de-
vices aboard aircraft is usu-
ally prohibited. Make sure
the module(s) are OFF if
you are using the computer
aboard aircraft.
Use the Fn + F11 key com-
bination/Touch Sensor In-
stant key to toggle power to
the WLAN module, and
check the LED to see if the
module is powered on or
not (see Table 1 - 4, on
page 1 - 10/ Table 1 - 3, on
page 1 - 8).
To Next Page
Loading...
