Clevo X7200 - Display Devices

NVIDIA Video Driver Controls
Display Devices B - 5
B
Display Devices
Note that you can use a DVI cable connected to the DVI-Out port, or an HDMI
(High-Definition Multimedia Interface) cable connected to the HDMI-Out port to
connect an external display (if you are using an older type of monitor you can use a
converter to convert the signal from DVI to VGA). See your display device manual
to see which formats are supported.
1. The built-in LCD.
2. An external display connected to the DVI-Out Port.
3. An external display/TV (if the TV supports an HDMI connection) connected to the
HDMI-Out Port.

Display Devices
Besides the built-in
LCD, you can also use
an external monitor/flat
panel display as your
display device. The dis-
play options are:
• The built-in LCD.
• An external display
connected to the DVI-
Out port.
• An external display
connected to the
HDMI-Out port.
Note that HDMI sup-
ports video and audio
signals.
DO NOT use the Fn +
F7 key combination to
toggle through display
options when SLI is en-
abled.

Monitor and TV Tuner
If you are connecting both a monitor/flat panel display to the DVI-Out Port, and a cable/aer-
ial to the optional TV Tuner module, make sure you attach the cable/aerial to the TV Tun-
er first, then the monitor.