CLF ARES - Specifications

WWW.CLF-LIGHTING.COM
25.0
Specifications
Physical
Length
495mm
Width
254mm
Height
386mm
Weight
13 kg without accessories
Dynamic Efects
beam angle
21°
Optics
Light source
36 pcs high-power LEDs (RGBW)
Control and Programming
Control
DMX512-A
DMX channels
04 / 09 / 11 / 16 / 21 / 27 / 30
Setting and addressing
Control panel with backlit LCD graphic display
Protocol
USITT DMX512-A
Control and Programming
Color
Black
Housing
High strength die-casting aluminum
Installation
Orientation
Any
Minimum distance to combustible materials
100 mm. from fixture
Minimum distance to illuminated surfaces
200 mm. from fixture
Connections
AC power input
®
PowerCON TRUE 1 input socket
AC power throughput
®
PowerCON TRUE 1 output socket
DMX data in/out
5 pin locking XLR (3 pin optional with # CLF-13-453 & CLF-13-454)
Electrical
AC power
100-240V nominal, 50/60 Hz
Maximum total power consumption
380 W
Power supply unit
Auto-ranging electronic switch mode
Power consumption, all efects static, zero light output
<15 W
Power consumption
120 V, 60 Hz
380 W, PF 0.991
240 V, 50 Hz
370 W, PF 0.952
PF = power factor. Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%. Thermal
Cooling
Forced air (temperature-regulated, low noise, user-definable levels)
Maximum ambient temperature (Ta max.)
40 °C
Minimum ambient temperature (Ta min.)
-20 °C
Total heat dissipation (calculated, +/- 10%)
820 BTU/hr.