11
HOW TO USE (Cont.)
ANION
Press this button to activate the ionizer. Press the button again to turn o.
When activated the Anion button will illuminate on the display.
This function is used to purify the room air while also
blowing air.
Creating negative ions using electricity and then
discharges them into the air. These negative ions attach
to positively charged partcles in the room, such as dust,
bacteria, pollen, smoke and other allergens.
This then bonds the ions together to create dense dirt
particles that cannot float in the air.
COOL
Press the COOL button to turn on your humidifying function and cool the air.
3. Press Again to Turn OFF.
4. When the COOL function is turned OFF, the Air Cooler will operate as a
fan and the water will not be used to cool the air.
1. Before you activate this mode, MAKE SURE the water level is at the “MIN”
level or above. NO WATER in the tank may damage the unit.
REFER TO PAGE 9 - WATER TANK (7).
2. The 2x Ice Packs should be placed in freezer and frozen before placing
into top of the Air Cooler.
You can do this by raising the top lid and placing the 2x ice packs as to below.
To Next Page
Loading...
