12
HOW TO USE (Cont.)
LOW WATER ALARM - The unit is equipped with a Low Water Alarm sensor. In
Cooling Mode, when water in the tank is below the minimum level, you will hear
a beeping sound and the indicator light will flash continuously. The unit will auto-
matically pause evaporative cooling.
Refill the water tank to deactivate the alarm in cool mode. First switch OFF the
unit and unplug from the power outlet. Fill the water tank with water above the
minimum water level mark. Plug in and switch ON again.
To deactivate the alarm and continue using the unit as a fan (without evaporative
cooling), switch the unit OFF and then ON again. The Low Water Alarm will not
act ivate in Fan only mode. The Low Water Alarm will sound again if the COOL
function is activated while the water tank is still empty.
To Next Page
Loading...
