To Next PageTo Next Page
Need help?Do you have a question about the Clifford 2.2X and is the answer not in the manual?
General| Number of Buttons | 4 |
|---|---|
| Remote Range | Up to 1 mile |
| Keyless Entry | Yes |
| Alarm | Yes |
| Remote Start | Yes |
| System Type | 2-Way Security System |
Details the wire connections for the primary harness.
Explains the connection of each wire and its applications.
Describes the Green wire's function for door lock control.
Describes the Blue wire's function for door lock control.
Details operation and installation of the LED indicator.
Explains the Valet/Program switch function and mounting.
Provides steps for optimal transceiver/antenna mounting and installation.
Details the Green wire input for shock sensor detection.
Explains the jumper's role in light flash output configuration.
Lists basic system features and their settings.
Lists advanced system features and their settings.
Describes standard transmitter button assignments for arming, disarming, and panic.
Describes single button transmitter assignments for arming, disarming, and panic.
Explains siren chirps indicating system status during arm/disarm.
Lists zone numbers, trigger types, and input descriptions.
Allows selecting active inputs and sensors during a particular arming cycle.
Explains the VRS feature for disabling the vehicle during a carjacking event.
Ensures system state retention after power is disconnected.
Provides solutions for common system issues like starter kill and sensor problems.
