Need help?Do you have a question about the Clifford Concept 650MkII and is the answer not in the manual?
How to disarm the system using the valet switch and PIN code if the transmitter is unavailable.
Enter Valet Mode or disarm the system using the PIN code and the PlainView 2 Valet switch.
Describes the security technology that changes transmission codes to prevent theft.
Procedure to program additional compatible remote controls to the system.
Allows the user to set a personalized PIN code for system access.
Configure automatic vehicle starting based on battery voltage or temperature.
Configure transmitter channels for optional IntelliStart and SmartWindows system functions.
Detailed steps for entering a new PIN code and confirming its successful programming.
The system automatically arms the immobiliser 30 seconds after the ignition is turned off.
Details the sequence for BlackJax activation triggered by ignition, door, and brake pedal events.
IntelliStart system for remote vehicle starting, engine monitoring, and climate control.
To Next Page
General