Clifford cyber Arrow 3 User Manual

Details about the sophisticated miniature radio transmitters powering the system's remote controls.

Instructions on how to use the remote control buttons to arm, disarm, and operate various system functions.

Explanation of the ACG 2 technology providing advanced security against remote control cloning devices.

Information on the system's warning for low remote control batteries and replacement procedures.

Step-by-step guide for replacing the battery in the remote control unit.

Instructions on how to program additional remote controls for the Clifford system.

Details on the AutoArming feature and its customizable options like entry delay and visual acknowledgment.

Explanation of the secure valet mode, how to enable/disable it using a secret code, and its security safeguards.

Procedure for programming a personalized secret valet code for enhanced system security.

Describes the feature to toggle valet mode on/off using a button combination, bypassing security features.

Information about the FACT system designed to prevent repeated false alarms by verifying intrusion attempts.

Explanation of how the system immobilizes the vehicle's starter to prevent unauthorized engine start.

Details on the optional wireless immobilizer that adds a second layer of security by interrupting vehicle functions.

Specific instructions for restarting the engine in Europe after AutoImmobilization occurs due to system requirements.

How the system conserves battery power by automatically slowing the LED flash rate over time.

Description of user-selectable features for automatic door locking upon ignition and unlocking upon ignition off.

Information regarding the optional feature to remotely release the vehicle's trunk latch.

Details about the Piezo Sensor that detects vibrations and impacts, and optional sensor enhancements.

Features related to the siren, including remote silencing, automatic noise abatement, and customizable sounds.