STORING YOUR WINE COOLER
If you intend not to use the wine cellar for short periods of time, leave the control panel at its
usual settings.
During longer periods of absences :
• Remove bottles from the wine cellar
• Unplug the wine cellar from the electrical outlet
• Thoroughly clean the inside and outside of the wine cellar
• Leave the door open to avoid possible formations of condensation, mold or odors.
WHAT TO DO REGARDING POWER FAILURE ?
Most power failures are corrected within a short period of time. An hour or two loss of power
will not affect your wine cellar temperatures. To protect your wines while the power is off, you
should minimize the number of door openings. For power failures of longer durations, take steps
to protect your wine.
IF YOU HAVE TO MOVE YOUR WINE COOLER
Remove ALL bottles from the wine cellar and securely fasten down all loose items inside the
wine cellar. To avoid damaging the levelling legs, turn them all the way into the base of the unit.
REPLACING INTERIOR LIGHT BULB
To replace an interior light bulb :
1. Unplug the appliance from the outlet.
2. Remove the screw holding the light bulb cover. Remove the cover.
3. Unscrew light bulb. Replace the light bulb. NOTE : The light bulb should not exceed
25 WATTS.
4. Replace light bulb cover. Re-install screw to secure cover.
FEATURES AND BENEFITS
Powder coated, heavy duty steel cabinet with high density thermal insulation.
1. DIGITAL ELECTRONIC THERMOSTAT : Controls the temperature inside the wine cellar.
The compressor will cycle on as soon as the temperature rises above the desired level.
2. WOODEN SHELVES : slide-out for easy access to your wine
3. MAGNETIC DOOR GASKET : tight fitting magnetic door seal keeps all the cooling power
and humidity sealed inside.
4. Tempered, reversible glass door : tempered glass door is tinted for UV protection and allows
for easy interior visibility.
5. INTERIOR LIGHT : Illuminates when door opened.
23
To Next Page
Loading...
