EasyManua.ls Logo

Climax CTC-1052 - Page 38

Climax CTC-1052
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
35
CORRESPON-
DING DTMF
CHARACTER
COMMANDS
ITEM COMMAND EXAMPLE & USAGE DEFAULT
46#
Follow-on &
two-way
period
FOLTI
PROG 1111 FOLTI:02
To set the duration for follow-on & two-way voice
communication period
01-10=1-10 minutes
05 =
5 minutes
47# Off-set time OFFST
PROG 1111 OFFST:1
To set the off-set time
1=1 Hour, 2=2 Hours, 3=3 Hours
4=4 Hours, 5=8 Hours, 6=12 Hours
1 =
1 Hour
49# Supervision SUPPR
PROG 1111 SUPPR:0
To set the supervision timer
0=Disable, 1=4 Days, 2=5 Days, 3=6 Days
4=7 Days, 5=8 Days, 6=9 Days, 7=10 Days
0 = Disable
61#
Check SIM
card Pin
code
SIMPE
PROG 1111 SIMPE:0
To set Check SIM Card Pin Code
0 = Disable , 1 = Enable
0 = Disable
62#
Input SIM
card Pin
code
SIMPC
PROG 1111 SIMPC:0000
PROG 1111 SIMPC:12345678
To input SIM CARD Pin Code: 4~8 digits are allowed to be
entered.
Null
63#
Set speaker
volume
SPKVL
PROG 1111 SPKVL:2&1~5
¾ To set a communication channel: 2=Two
Way
¾ To set the speaker volume with a number, ranging
1~5.The higher the value, the louder the voice.
Default is set as (3) for two-way mode.
Two way: 3
64#
Set
microphone
sensitivity
MICSN
PROG 1111 MICSN:1~5
¾ To set the microphone volume with a number, ranging
1~5. The higher the value, the wider range the
sound received. Default is set as (3).
Note: only can be adjusted in the two-way mode.
Mic: 3
66#
Set guard
time for fall
sensor
FAGUD
PROG 1111 FAGUD01~99
To set the guard time delay time for fall sensor.
00=Instant, 01-99=1-99 seconds
15 sec
---
Country
code
REPLA
PROG 1111
REPLA:886&0
To replace the Country Code with 0
886 Æ Country Code
No country
code
--- IP address TCIP1
PROG 1111 TCIP1:192.168.1.110
To set/change the IP address for the Monitoring Station
Input IP address: 000.000.000.000 to 255.255.255.255
No IP
address
--- IP address TCIP2
PROG 1111 TCIP2:192.168.1.110
To set/change the IP address for the Monitoring Station
Input IP address: 000.000.000.000 to 255.255.255.255
No IP
address
---
IP address
confirm
COMIP
PROG 1111 COMIP:192.168.1.110 (for confirmation)
To set/change the IP address for the Monitoring Station
Input IP address: 000.000.000.000 to 255.255.255.255
No IP
address
---
Port
number
PORT1
PROG 1111 PORT1:3301
To set/change the port number for the IP address
Input 1 to 5 digits
No port
number
---
Port
number
PORT2
PROG 1111 PORT2:3301
To set/change the port number for the IP address
Input 1 to 5 digits
No port
number
---
Port
number
confirm
COMPO
PROG 1111 COMPO:3301 (for confirmation)
To set/change the port number for the IP address
Input 1 to 5 digits
No port
number
---
GPRS/IP
account
number
IPAC1
PROG 1111 IPAC1:1052
To set/change the GPRS/IP account number (4-10digit)
No
account
number
---
GPRS/IP
account
number
IPAC2
PROG 1111 IPAC2:1052
To set/change the GPRS/IP account number (4-10digit)
No
account
number

Related product manuals