Do you have a question about the ClimeMET CM7048 and is the answer not in the manual?
Provides essential instructions and warnings regarding the correct insertion of batteries into the base station and remote sensor.
Details methods for positioning the base station, either on a flat surface using foldable legs or wall-mounting.
Offers guidance on mounting the remote sensor, recommending placement for accurate temperature readings and optimal range.
Offers troubleshooting steps for when the remote sensor fails to establish a signal with the base station.
Provides solutions for intermittent signal loss, including checking interference and relocating units.
Offers guidance on troubleshooting inaccurate readings by checking batteries and sensor placement.
| Display Type | LCD |
|---|---|
| Temperature Range (Outdoor) | -40°C to 60°C |
| Temperature Range (Indoor) | 0°C to 50°C |
| Humidity Range | 1% - 99% (Indoor and Outdoor) |
| Wind Speed | 0 to 50 m/s |
| Rainfall Measurement | 0 to 9999 mm |
| Power (Remote Sensors) | 2 x AA Batteries |
| Power Supply | AC Adapter or Batteries |
| Data Transmission | 433 MHz |
| Measurement Parameters | Temperature, Humidity, Wind Speed, Wind Direction, Rainfall |
| Wind Speed Range | 0 to 50 m/s |
| Wind Direction Range | 0° to 360° |
| Rainfall Range | 0 to 9999 mm |
| Power (Base Station) | 3 x AA batteries |
| Wireless Range | 100m (open field) |
| Wind Direction | 0° to 360° |
Loading...