10
OSD Menu | Video | Display
• Aspect Ratio: Select the display aspect ratio (Full Screen, Cinema Scope, 4:3, Pillar Box
Expand, 1:1). Select Full Screen to correctly display the image without stretching.
• Image Mode: Select the video display source. (Camera VOV Switch, Camera, SD-Video,
*HDMI, *Switch HDMI, *Switch SD-Video). *HDMI, Switch HDMI, and Switch SD-Video modes
only available on 27” & 32” models only.
*Camera Video-on-Video (VOV) Switch- Displays SD Card content in the corner of the
display with camera image full screen.
*Switch HDMI- Alternates Camera image and HDMI source full-screen. Set the duration to
show Camera image on-screen, and duration of SD Card content. (5-60 sec.)
*Switch SD-Video- Alternates Camera image and SD Card content full-screen. Set the
duration to show Camera image on-screen, and duration of SD Card content. (5-60 sec.)
• PIP Size: Change the size of the SD Card VOV window. (Large, Middle, Small)
• PIP Position: Change the corner in which the VOV is displayed. (Bottom-Right, Bottom-
Left, Top-Left, Top-Right)
• VOV Switch Open Time: Select the duration in which VOV content is displayed on screen.
(1-10 sec.)
• VOV Switch Close Time: Select the duration in which VOV content is inactive on screen.
(1-10 sec.)
Display
• Color: (21” model only) Adjust to achieve a realistic image of the items within the viewing
area.
• Saturation: (27” & 32” models only) Adjust to achieve a life-like separation between colors.
• Tint: Adjust if the image has bluish or reddish tint to the white portions of the image.
• Sharpness: Adjust lower if the image appears too grainy or pixilated. Increase if the image
appears too soft.
Advanced-
• Video Mode: Select from video image presets (Normal, Cinema, Vivid, Natural).
• Color Temperature: Select from color temperature presets (Cool, Natural, Warm).
Video continued...
To Next Page
Loading...
Need help?
General
