47
Special functions
120T-180T
Num
Description Notes
1
Normal view --
2
Operating mode
0 - Standby; 2 - Cooling; 3 - Heating;
4 - Forced cooling
3
Fan speed 0: Shutdown - 1
to 7: Increase the speed
4
Total capacity required of the indoor unit --
5
Capacity required of the outdoor unit --
6
Temperature of the pipes T3 Actual value
7
Room temperature T4 Actual value
8
Supply temperature T5
Actual value (if it is greater than one hundred, only the hundreds
and tens digits will be displayed)
9
Reserved --
10
EXV opening degree Actual value = value displayed x 8
11
Current value Actual value
12
AD voltage value Actual value
13
Average temperature T2 Actual value
14
Number of indoor units Actual value
15
Number of indoor units in operation Actual value
16
12
to
16kW: the last fault or protection code (if
there is no fault or protection code, "nn" will be
displayed)
18kW: 18
--
17
12 to 16kW: "- -" is displayed
18kW: priority mode (reserved)
The demand for 12
to
16kW ends. “0” is displayed on 18kW
18 18kW: Program version
Only for 18kW
19
18kW: The last fault or protection code (if
there is no fault or protection code, "nn" will
be displayed)
Only for 18kW
20 18kW: "-" is displayed
Only for 18kW
To Next Page
Loading...
Need help?
General
