HOW TO RECORD VIDEOS TO THE USB STORAGE DEVICE?
2.1 Connect Diagram
1. Connect the power adapter. Plug the power adapter into the power socket and plug the other end into the 12V/1A port of
ClonerAlliance Box Pro.
2. Connect the video source/player. For HDMI Video Sources: Using the included HDMI cable, connect your video source
(gaming system, set-top box, etc.) to the ClonerAlliance Box Pro. Plug it into the IN port. For AV/VGA/YPbPr Video
Sources: Using the included MMI cable, plug one end into the “MMI IN”port. Plug/Connect the other end to your video
source device.
3. Connect ClonerAlliance Box Pro to TV. Connect your TV to the “Out”port on the ClonerAlliance Box Pro using
another HDMI cable (not included).
4. Plug the USB storage device into the “Storage”port of ClonerAlliance Box Pro.
6
To Next Page
Loading...
