Need help?Do you have a question about the Cloud Drive CDC6 and is the answer not in the manual?
General| Brand | Cloud Drive |
|---|---|
| Model | CDC6 |
| Category | Bicycle Accessories |
| Language | English |
Illustrates the physical appearance of the CDC6 display unit.
Introduces the dimensional drawings of the CDC6 display unit.
Shows the cumulative distance traveled by the ebike.
Displays the distance covered during the current riding trip.
Shows the real-time speed of the ebike.
Indicates the status of the ebike's front and rear lights.
Allows users to choose the level of Pedal Assist System (PAS) support.
Displays the remaining battery charge level.
Lists and explains error codes displayed for system malfunctions.
Allows selection between kilometers and miles for distance units.
Enables setting the wheel diameter for accurate speed and distance.
Controls the USB port for charging external devices.
Activates the 6Km/h assistance mode.
Details the functions of the SET, UP, DOWN, and ON/OFF buttons.
Explains how to turn the display screen on and off.
Describes the procedure to switch the front lights on and off.
Details how to enable or disable the USB charging feature.
Explains how to adjust the Pedal Assist System (PAS) level.
Details the information displayed on the screen, including speed, distance, and PAS level.
Describes how the battery level is displayed and indicated on the screen.
Introduces error codes that appear on the display when the system has issues.
Explains how the controller provides real-time motor power feedback.
Guides on how to set and change the display's password for access.
Enables setting the wheel diameter for accurate speed and distance.
Details how to switch between different speed units like Km/h and MPH.
Guides on how to set or customize the maximum speed limit.
Shows how to view the software version information of the display unit.
Troubleshooting steps for when the display fails to power on.
Guidance on resolving issues indicated by error codes on the display.
Outlines the terms and conditions of the product warranty.
Lists items and conditions excluded from warranty coverage.
Indicates that the display is functioning normally without any errors.
Signifies that the ebike is currently undergoing a braking action.
Indicates a problem with the throttle's home position.
Signals that the throttle component has failed or is broken.
Shows that the battery voltage is too low, triggering protection.
Indicates that the battery voltage is too high, activating protection.
Signifies a disconnection or fault in the motor's Hall sensor signal line.
Indicates a fault or break in one of the motor's phase connections.
Alerts that the controller is overheating and has reached its protection threshold.
Indicates that the motor is overheating and has reached its protection threshold.
Signals a malfunction or failure of the current sensor component.
Indicates a problem with the battery's temperature sensor.
Signals a fault in the temperature sensor located within the motor.
Indicates a malfunction of the temperature sensor within the controller unit.
Shows that the Pedal Assist System (PAS) sensor has failed or is broken.
Indicates a communication failure between the BMS and other components.
Signals that the front light component is physically broken or damaged.
Indicates a functional failure of the front light system.
Shows a failure in the torque signal from the torque sensor.
Indicates a failure in the speed signal generated by the torque sensor.
Signals a general communication failure within the system.
To Next Page