Cloud drive intelligent technology Co.,Ltd
Jim@clouddrive.tech Jim:(+86)18221324155
(3)Speed unit setting
After finishing the wheel diameter setting, click key to enter the speed unit
setting interface. And then, the unit will be switched by clicking or key, as
shown in figure 7-9:
Figure 7-9
(4)speed limit setting
After finishing the speed unit selection, click key to enter the speed limit setting
interface. The speed limit can be adjusted by clicking or key, and the
conventional maximum limit speed 25Km/h can be customized. The operation
process is shown in figure 7-10 (speed shown in figure is 25Km/h).
Figure 7-10