5. Tap Save to finalize your changes
Set an order title prefix to easily distinguish orders from different devices
AVAILABLE ONLY ON REGISTER PLAN
This feature is only available on Register Plan. Learn about our Service Plans.
Use the Setup app to assign custom order title prefixes to your Clover devices. The
custom prefix assigned to your devices help to distinguish which order came from which
device.
For example, a fast food restaurant with two Clover devices for order-taking might use the
prefix “L” for the device on the left side of the counter, and R for the right side; the order
numbers will be R25 and L25. Or, a restaurant with a Clover device at their Bar and a second
in their Patio might use prefixes “B” for Bar and “P” for Patio.
NOTE
You can only access Setup app > Devices on Web Dashboard if you are the account
owner. You must log into Web Dashboard using the email assigned to the account owner.
You must have order numbers set to automatic for custom prefixes to work.
To set an order title prefix:
1. Open Setup app
2. Tap Devices
3. Select the device you want to edit
P2PE Implementation Manual for PCI P2PE v2.0 Clover Network, Inc. April 2018
© 2018 Clover Network, Inc. All Rights Reserved. Page 49
To Next Page
Loading...
