CMC AZTEK - Page 2

Traceability & Markings
Nomenclature
Product Use
!
!
A
B
C
D
E
F
G
H
D
C,J
K
L,M
I
C
D
E
A
B
G
G
F
CMC Rescue, Inc.
6740 Cortona Drive
Goleta, CA 93117, USA
805-562-9120 / 800-235-5741
cmcpro.com
A Manufacturer of Record
B Product Name
AZTEK
C Mark and Information of NFPA certication body:
Standard Markings:
NFPA 2500 (1983), 2022 ED.
D Notied Body Controlling Production of this
Personal Protective Equipment to EN12278:2007:
0598
SGS Fimko Ltd,
Notied Body 0598
Takomotie 8
00380 Helsinki, Finland
Tel. +358.9.696361
E Mark and Information of the approved body in charge of
certication:
0120
SGS United Kingdom Limited.
Rossmore Business Park, Ellesmere Port,
Cheshire CH65 3EN.
F Rope Load Diagram
G Carefully Read the Instructions for Use:
i
H Country of Manufacture
I Becket MBS
J Minimum Breaking Strength (MBS)
K Manufacturing Site
L Model Identication
M Individual Number
A Swivel
B Swivel Axle Bolt
C Rope Cover to Secure End of Rope
D Pin to Attach Prusik to Desired Pulley
E Main Axle Bolt
F Chassis
G Sheaves
Equipment Record Table
Product Name, Model
Manufacturer
CMC RESCUE, INC
6740 Cortona Drive
Goleta, CA 93117 USA
Manufacturer Contact
Information
Tel: 800-235-5741 / 805-562-9120
Fax: 800-235-8951 / 805-562-9870
Email: info@cmcpro.com
Web: cmcpro.com
User (company, name,
and address)
Product Serial #
Year of Manufacture
Purchase Date
Date of First Use
Expiration Date
Periodic Inspection Checklist
Check
Date
Notes/
Results
Inspector Name
& Signature
Date of Next
Check
Manufacturer of Record
CMC Rescue, Inc.
6740 Cortona Drive
Goleta, CA 93117, USA
Manufacturing Site
Rock Exotica LLC
POB 160470
Freeport Center, E-16
Cleareld, UT 84016, USA
Notied Body conducting the EU type
examination:
SGS Fimko Oy – Notied Body 0598
Takomotie 8
Helsinki, 00380 Finland
Notied body controlling the manufac-
turing of this PPE:
SGS Fimko Oy – Notied Body 0598
Takomotie 8
Helsinki, 00380, Finland
Approved body controlling the manu-
facturing of this PPE:
SGS United Kingdom Limited – Notied
Body 0120
Rossmore Business Park, Ellesmere
Port,
Cheshire CH65 3EN
*Applicable Products Only
Declaration of Conformity
CMC Rescue, Inc. declares that this
article is in conformity with the essential
requirements and the relevant provisions
of EU regulations. The Declaration of
Conformity can be downloaded at the
following website: cmcpro.com
A B C
Legend
Imminent risk of
serious injury or
death.
Appropriate
function or
use.
!
Imminent risk
of accident or
injury.
Equipment
incompatibility.
FIELD OF APPLICATION
The AZTEK Double Pulleys are designed and manufactured as personal protective equipment
(PPE) used for fall protection during work and rescue. They are in accordance with
EN12278:2007, and Regulation (EU) 2016/425. This product is also classied to NFPA 2500
(1983), 2022 Edition as Load Bearing Pulleys. This product shall not be used outside of its
limitations, or for any purpose other than that for which they are intended.
Responsibility
These instructions explain the correct use of your equipment. The warning symbols inform
you of some potential dangers related to the use of your equipment, but it is impossible to
describe them all. You are responsible for heeding each warning and using your equipment
correctly. Any misuse of this equipment will create additional dangers. Contact CMC if you
have any questions or difculty understanding these instructions. Check cmcpro.com for
updates and additional information.
Before using this equipment, you must have a rescue plan in place to deal with any emer-
gencies that could arise and be medically t and capable of controlling your own security in
emergency situations. Motionless suspension in a harness may cause severe injury or death.
Check equipment before and after use.
User Information
User Information shall be provided to the user of the product. NFPA 1983, incorporated into
the 2022 edition of NFPA 2500 recommends separating the User Information from the equip-
ment and retaining the information in a permanent record. The standard also recommends
making a copy of the User Information to keep with the equipment and that the information
should be referred to before and after each use.
Additional information regarding life safety equipment can be found in NFPA 1550, and NFPA
1858 and NFPA 1983, incorporated in the 2022 edition of NFPA 2500. This document must be
provided to the user by the retailer in the respective country’s language and must be kept with
the equipment while it is in use. Observe relevant national regulations.
TRACEABILITY AND MARKINGS
See image.
NOMENCLATURE
See image.
COMPATIBILITY
Verify that this product is compatible with the other equipment in the system and that its
intended applications meet current standards. Equipment used with this product must meet
regulatory requirements in your jurisdiction and/or country, and provide safe, functional
interaction.
All connections should be evaluated for risk based on the loads, redundancy, and rigging
practices involved. Always verify that connectors are properly positioned before loading
them. Equipment used with this product must meet current standards in your country. When
combining this product with other equipment and/or using this product in a rescue/fall arrest
system, users must understand the instructions of all components prior to use and comply
with them to ensure that safety aspects of these items do not interfere with each other.
Danger may arise and functionality may be compromised by combining other equipment with
this product. User assumes all responsibility for non-standard use or added components.
Contact CMC if you are uncertain about the compatibility of your equipment.