EasyManua.ls Logo

CMC S19HD PRO - User Manual

CMC S19HD PRO
83 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MAN.234 Rev.3 ENG - Use and maintenance manual S19HD PRO page
1
of
83
0 Introduction
hank you for the trust you have showed us buying a C.M.C. mobile
elevating work platform (MEWP). We are sure you will be pleased
with your choice.
0.1
Content of the manual
This manual contains the technical specifications and the instructions for
transfer, use and maintenance of the MEWP. While drawing up this manu-
al, we took into consideration all the operations that are part of a normal
use and a regular maintenance of the machine. So, for a correct and opti-
mum use, you must follow the described instructions carefully.
This manual has been drawn up in order to:
Show the technical features of the machine;
Describe the control stations and their commands;
Provide with the instructions for the transport, placement and use
of the machine;
Describe the safety devices;
Point out the potential risks and/or possible dangerous situations;
Provide with the necessary instructions for the ordinary mainte-
nance operations;
Provide with the instructions for the filling of the check register.
THE USE AND MAINTENANCE MANUAL IS CONSIDERABLE
AS A PART OF THE MACHINE. In case of sale of the MEWP,
please give this manual to the new owner.
LEGEND OF THE SYMBOLS USED IN THIS MANUAL:
(CAUTION) = warns the user about the risk of serious damages
to people or to part of the equipment or the machine,
if you do not obey the safety regulations.
(WARNING)
= notifies the possibility of minor injuries to people
or little damages to the platform or machine parts.
(FORBIDDEN) = prohibition signal
(
OBLIGATION) = obligation signal
(CAUTION)
= warns the user about the risk of environmental
pollution.
*
(OPTIONAL)
= indicates an optional outfit.
(IMPORTANT NOTE) = indicates information and suggestions useful to
work with the MEWP.
This manual is addressed to:
users: operators, ground assistants, guard staff, safety man-
ager, service manager;
manufacturers, dealers, owners, lessors or lessee, brokers.
T
www.duma-rent.com

Questions and Answers

  • M
    Melanie MarquezJul 25, 2025
    What to do if the aerial part of the CMC S19HD PRO does not work?
    • T
      Timothy HerreraJul 25, 2025
      If the aerial part of the CMC Lifting Systems isn't functioning, there are several potential causes. First, the hydraulic pump unit might be faulty, requiring a replacement. Second, ensure the control stations are activated by turning them on and connecting them. Third, the exchange solenoid valve could be de-energized, in which case you should replace the exchange valve. Lastly, check if the emergency button is activated; if so, turn it to disable it and reset the MEWP.
  • H
    Holly BarnettJul 30, 2025
    Why is it impossible to start the endothermic engine in CMC S19HD PRO?
    • S
      Savannah RubioJul 30, 2025
      Several factors can prevent the endothermic engine from starting in your CMC Lifting Systems. Check if the emergency button is activated and disable it. Ensure the battery isn't discharged; if it is, replace it. Verify that the fuel tank isn't empty and refuel if necessary. Finally, confirm that the hydraulic oil level is sufficient and refill if it's too low.
  • J
    John CopelandAug 4, 2025
    Why consent light for stabilization does not turn on in CMC Lifting Systems?
    • T
      Tracey SchmidtAug 5, 2025
      The consent light for stabilization on your CMC Lifting Systems might not illuminate due to several reasons. Ensure the aerial part of the MEWP is in the transport position. Check the 30A battery side fuse and replace it if it has failed. Verify that no wires are disconnected from the battery. If these steps don't resolve the issue, the board may be defective.
  • K
    Kim BenitezAug 10, 2025
    What to do if the platform leveling of CMC S19HD PRO Lifting Systems does not work?
    • M
      Michael FisherAug 10, 2025
      If the platform leveling system on your CMC Lifting Systems isn't working, check for oil leakage and tighten any loose hydraulic connections. Additionally, inspect the cylinder seals for wear and replace them if necessary.
  • I
    Isaac AndrewsAug 14, 2025
    What to do if the consent light for aerial part use does not turn on with the MEWP stabilized in CMC Lifting Systems?
    • J
      Jane CraigAug 14, 2025
      If the consent light for aerial part use doesn't turn on after the MEWP is stabilized, it may be due to a malfunctioning micro-switch system, which would require replacing the micro-switch. Also, ensure that stabilization is complete by further extracting the outriggers until they make contact with the ground.
  • M
    Michael SmithSep 10, 2025
    How to fix low maneuvers speed in CMC Lifting Systems?
    • K
      kevin45Sep 12, 2025
      If your CMC Lifting Systems is experiencing low maneuver speed, there are several potential causes: a pump failure, which requires replacing the hydraulic pump; a low hydraulic oil level, which requires refilling the hydraulic oil; or a clogged oil filter, which needs replacement.

Summary

Introduction and General Information

Manual Content and Purpose

Details the manual's technical specifications, operational instructions, and purpose.

Disclaimers, Regulatory References, and Amendments

Covers disclaimers, usage guidelines, regulatory references, and amendments.

Specifications Overview

Lists performance, dimensions, weight, and power specifications of the MEWP.

Machine Identification and Compliance

Identification Plate and Certifications

Details the machine's identification plate and compliance certifications (CE, TÜV).

Classification and Loading Cycles

Information on MEWP classification, operating conditions, and expected lifespan.

MEWP Description and Components

Definition, Purpose, and Main Components

Defines the MEWP, its purpose, and describes its main structural and functional parts.

Control Systems

Engine Ignition and Control Stations

Details engine ignition controls, platform, basket, and emergency control stations.

Remote Connection System

Explains how to connect to the MEWP remotely for diagnostics and updates.

Operational Procedures

Environmental Conditions and Transport

Specifies operating conditions, safety distances, and transport procedures.

MEWP Movement, Stabilization, and Aerial Use

Covers travel, placement, stabilization, aerial part operation, and load limits.

Emergency Procedures

Outlines emergency maneuvers, system failures, and recovery actions.

Safety Rules and Devices

General Safety Rules

Lists crucial safety rules for all phases of MEWP operation.

Safety Devices Overview

Lists and describes the various electrical, hydraulic, and mechanical safety devices.

System Specifications

Electrical System

Details the MEWP's electrical supply, fuse box, and component calibration.

Hydraulic System

Lists pressure settings for relief valves and optional components for the hydraulic system.

Maintenance and Service

Maintenance Schedules and Procedures

Outlines daily, weekly, monthly, and periodic maintenance tasks and schedules.

Engine, System Maintenance, and Troubleshooting

Details maintenance for engines, systems, consumables, and troubleshooting common issues.

Testing, Documentation, and Records

Testing Procedures and Seals

Details overload tests, operating tests, and lists anti-tampering seals.

Machine Logs and Records

Explains the control register for logging machine events, deliveries, and replacements.

CMC S19HD PRO Specifications

General IconGeneral
BrandCMC
ModelS19HD PRO
CategoryLifting Systems
LanguageEnglish

Related product manuals