CMC S19HD PRO - Machine Identification and Compliance; Identification Plate and Certifications

MAN.234 Rev.3 ENG - Use and maintenance manual S19HD PRO page 6 of 83
1.2

Identification plate

On the MEWP turret, there is a plate with all the identification data of the
machine:
TYPE S19
MANUFACTURER
C.M.C.
MODEL S19HD (PRO) YEAR 2020
SERIAL NR. S19A2140 TOT. WEIGHT 6173 lbs
CAPACITY
441 lbs
INCLUDING
2 persons
MAX HYDRAULIC OPERATING PRESSURE
3336 PSI
MAX MANUAL HORIZONTAL FORCE ALLOWED
90 lbs
MAX WIND SPEED ALLOWED
28 mph
MAX FRAME INCLINATION ALLOWED
1°
EXTERNAL POWER SOURCE
230 V 50 Hz
C.M.C. s.r.l.
Via Bitritto, 119
70124 BARI - ITALY
Tel. 080 5326606/557
http://www.cmclift.com
E-mail: info@cmclift.com
Picture 1: identification plate.
www.duma-rent.com