MAN.234 Rev.3 ENG - Use and maintenance manual S19HD (PRO) page
22
of
83
4 Use procedures
4.1
Environmental operating conditions
The equipment can work normally in the following environmental condi-
tions (for uses in different conditions, a special equipment is required):
• temperature from -20 °C (-4 °F) to +55 °C (131 °F)
(even +70°C (158 °F) for short periods which do not exceed 24 h);
• humidity from 30% to 90% (at 20 °C);
• max wind speed 12,5 m/s (45 Km/h - 27,96 mph).
Do not cover the equipment with cloths in order to avoid condensation
inside the electrical boards.
After storage in closed and very wet places for a long period, the ma-
chine could have some problems due to condensation in the electrical
boards: in this case, should this occur, please contact the C.M.C. Ser-
vice before use.
Do not work in areas with dangerous environmental conditions:
poor visibility, storms, lightning risk, etc.
Do not to operate inside refrigerating rooms.
Do not work when the wind speed exceeds a 12,5 m/s (45 Km/h).
We hereby enclose the Beaufort wind scale (Table 2):
Table 2: Beaufort wind scale.
We recommend the use of an anemometer, to determine direction
and speed of wind.
Wind power Wind speed Land conditions
Beaufort
number
description m/s Km/h
0 Calm 0-0,2 1 Calm. Smoke rises vertically
1 Light air 0,3-1,5 1-5 Wind motion visible in smoke.
2 Light breeze 1,6-3,3 6-11
Wind felt on exposed skin. Leaves
To Next Page
Loading...
