To Next PageTo Next PageWhat does 'Wrong TPN data' mean on my CME VET-PRO VIP 2000?
If the CME Medical Equipment displays 'Wrong TPN data', it means the set parameters are impossible to perform because the volume or time parameters are incorrect. Check the data and change it accordingly.
General| Brand | CME |
|---|---|
| Model | VET-PRO VIP 2000 |
| Category | Medical Equipment |
| Language | English |
Details the key features of the VET-PRO VIP 2000 infusion system.
Explains the buttons, keys, and display elements of the VET-PRO VIP 2000 infusion pump.
Illustrates and describes the pump's components when the door is open and the charger.
Outlines the safety checks integrated into the VET-PRO VIP 2000 infusion system.
Discusses pump accuracy, start-up curves, and trumpet curves for rate accuracy.
Defines and explains the various symbols used on the VET-PRO VIP 2000 system and manual.
Clarifies terms used in the manual and specifies the intended use of the infusion pump.
Lists essential warnings to prevent personal injury or death during pump operation.
Provides cautions to prevent damage to the infusion pump and its components.
Instructions for unpacking the VET-PRO VIP 2000 pump and verifying all included items.
Detailed steps for charging the pump's battery using the charger unit.
Covers tests before patient attachment and describes alarm behavior.
Provides instructions for loading the IV set and performing priming functions.
Details the five different programming options available on the infusion system.
Instructions for programming the continuous infusion mode, including rate and volume.
Guide for setting up intermittent infusions with dose delivery at set intervals.
Explains how to program up to twenty-five sequential steps for drug delivery.
Details the Total Parenteral Nutrition (TPN) mode with trapezoid program.
Covers Patient Controlled Analgesia (PCA) programming and bolus functionalities.
Describes how to access and interpret infusion history and event logs.
Instructions for setting pressure defaults and managing pump lock modes.
Explains how to use Info Mode and access various setup adjustments.
Guide to accessing and modifying adjustable parameters via Change Set up.
Describes what occurs when an alarm is detected and how to mute it.
Provides a table of common problems, possible causes, and required actions.
Lists key performance metrics including pumping mechanism, rates, volume, accuracy, and alarms.
Details the non-operating and operating temperature, humidity, and air pressure requirements.
Provides instructions for safely cleaning and storing the pump and charger.
Outlines recommended periodic maintenance tasks performed by certified technicians.
Details pump operation on battery power and provides battery care recommendations.
Specifies the warranty period, coverage, exclusions, and purchaser responsibilities.
