Need help?Do you have a question about the CME NIKI V4 and is the answer not in the manual?
General| Brand | CME |
|---|---|
| Model | NIKI V4 |
| Category | Medical Equipment |
| Language | English |
Small, light, compact pump with Macro and Micro programs, accurate delivery, rechargeable battery.
Explains how the information in the manual is presented and defines terms used.
Details critical warnings and precautions for safe operation and handling of the infusion pump.
Outlines the terms, conditions, and duration of the warranty for the NIKI V4 infusion pump.
Provides instructions for returning the instrument for service or warranty repairs.
Lists the technical specifications of the NIKI V4 Volumetric Infusion Pump, including dimensions and power.
Details the controls and indicators on the front panel of the NIKI V4 infusion pump.
Illustrates and describes the front panel components when the pump door is open.
Shows and explains the components and markings on the rear panel of the NIKI V4 infusion pump.
Step-by-step guide on how to set up and operate the NIKI V4 infusion pump.
Covers the fundamental steps for operating the NIKI V4 infusion pump, including setting rate and VTBI.
Explains the purpose and operation of the priming function for the infusion set.
Provides a troubleshooting guide for common pump malfunctions and recommended corrections.
Details the procedures for cleaning and maintaining the NIKI V4 infusion pump safely and effectively.
Lists and explains various alarm conditions, their causes, and recommended remedies.
Describes procedures for automatic calibration modes like auto cal and auto pres.
Outlines the steps for performing manual calibrations for the infusion pump.
Explains how to adjust the default pressure limit settings on the infusion pump.
Details maintenance procedures, fuse replacement, and service information for hospital biomedical departments.
Describes how to change the pump's default program to suit specific hospital requirements.
Explains how to identify and interpret device failures stored in the pump's memory.
Guides on performing a startup test to verify pump indicators and alarms function correctly.
Outlines procedures to check device operation and functionality after repair.
Details tests for self-test, infusion test, and various alarm conditions.
Lists tests for pressure sensor, calibration, occlusion, and battery performance.
Covers disassembly, calibration, tools, and test equipment for maintenance and repair.
A flowchart illustrating the process for troubleshooting, repair, and recalibration of the infusion pump.
To Next Page
