NIKI V4 Operator’s Manual 7
Safety Precautions
The pump Power cord should be connected to a grounded AC outlet Furnishing.
, WARNING
Any adjustments, maintenance or repair of the uncovered pump
under voltage, should be avoided. If necessary, these repairs should
be carried out be skilled technicians who are aware of the hazards
involved.
The should be operated within a temperature range of 15ºC (59ºF) to
45ºC (113ºF).
, WARNING
Do not operate pump near equipment that emits high energy radio
frequencies, such as electro-surgical cauterizing equipment and
cellular telephones. False alarm signals may occur.
) NOTE: Read and understand the entire Operation Manual before using
pump since important precautions follow throughout the text.
*
CAUTION
To avoid possible damage to the equipment, observe the
following:
•
Do not immerse pump in liquids.
•
Clean solution spills immediately from the pump. Use a damp cloth
or sponge. A cleaning disinfectant may be used. Wipe thoroughly
with a dry cloth.
•
Do not clean pump with chemicals such as Xylene, Toluene,
Acetone, or similar solvents. These chemicals cause damage to
plastic components and paint.
•
Do not use pens or any other sharp object to press keys. Torn or
punctured membranes expose keys to damage.
To Next Page
Loading...
Need help?
General
