CME VX6 User Manual

66
In the U-CTRL mode:
Sending data:
1. Any messages sent by keyboard/controller parts and messages from the MIDI IN
ports will be routed to USB IN A in the computer sequencing software.
2. Any messages to MIDI OUT port 1 will also be duplicated to the expansion board
and under the local control. (The local control is on by default)
3. Messages sent by any keyboard parts can be routed to one of the MIDI OUT Port
1/2/3/4. (by the F1-F8 port settings before entered the U-CTRL mode)
4. Messages sent by any U-CTRL parts will be routed to USB IN B in the computer
software.
Receiving data:
5. Messages from the MIDI IN port will be routed along with the related keyboard parts
messages.
6. Messages to USB OUT A in the computer software will be routed to MIDI OUT 4.
7. Messages to USB OUT B in the computer software will be routed to SEQ transport
buttons and faders.
8. Messages to USB OUT C in the computer software will be routed to the expansion
board.

CME VX6 Specifications

General

Brand	CME
Model	VX6
Category	Electronic Keyboard
Language	English