GB
44
Risks caused by vibrations
The vibration values specified in the technical
data represent the main uses of the device.
The actual existing vibrations during use may
deviate from these as a result of the following
factors:
• Incorrect use of the product;
• Unsuitable tools inserted;
• Unsuitable material;
• Insufficient maintenance.
You can reduce the risks considerably by fol-
lowing the tips below:
– Maintain the device in accordance with
the instructions in the operating instruc-
tions.
– Avoid working at low temperatures.
– When it is cold, make sure your body and
your hands, in particular, are kept warm.
– Take regular breaks and move your
hands at the same time to promote circu-
lation.
Residual risks
Even with proper use of the product and when
heeding all safety instructions in these
instructions for use, the following residual
risks can arise:
• Touching the saw blade in the area which
is not covered.
• Reaching into the running saw blade.
• Rebound from workpieces and workpiece
parts.
• Broken saw blades.
• Ejection of damaged hard metal parts
from the saw blade.
• Hearing damage through not using the
necessary hearing protection.
• Harmful emissions from wood dust when
using the product in enclosed rooms.
Personal protective equipment
Your product at a glance
P. 3, item 1
1. Collecting sack
2. Release button
3. Reciprocating protective hood
4. Workpiece stop
5. Length stop
6. Saw bench
7. Extension handle
8. Clamping fixture
P. 3, item 2
9. On/Off switch
10. Handle
11. Safety bolt
12. Locking screw for incline adjustment
13. Locking screw for mitre angle
Scope of supply
• Chop and mitre saw
• Length stop
• Extension handle
• Clamping fixture
• Collecting sack
• Bag with small parts
• Instructions for use
Assembly
P. 4, item 3
– Press handle (10) gently downwards and
keep it pressed.
– Pull out the safety bolts (11).
CAUTION! Risk of injury due to
vibrations! Vibrations may, in par-
ticular for persons with circulation
problems, cause damage to blood
vessels and/or nerves.
If you notice any of the following
symptoms, stop working immediately
and consult a doctor. Numbness of
body parts, loss of sense of feeling,
itching, pins and needles, pain,
changes in skin colour.
Wear goggles and ear defenders
when using the device.
Wear a dust mask when working in a
dusty environment.
Wear tight-fitting clothing when work-
ing with the product.
Cover long hair or wear a hair net if
necessary.
Do not wear protective gloves when
working with the product.
Wear gloves when touching the saw
blades and rough materials.
Note: The actual appearance of your
product may differ from the illustra-
tions.
DANGER! Risk of injury due to
accidental switch-on! Disconnect
the mains plug before carrying out
any work on the device.
To Next Page
Loading...
Need help?
General
