GB
48
If you can’t fix the fault yourself, contact your
nearest vendor. Please be aware that any
improper repairs will also invalidate the war-
ranty and additional costs may be incurred.
Disposal
Disposal of the appliance
A crossed-out wheelie bin icon
means: Batteries and rechargeable
batteries, electrical or electronic
devices must not be disposed of with
household waste. They may contain
substances that are harmful to the environ-
ment and human health.
Consumers must dispose of waste electrical
devices, spent portable batteries and
rechargeable batteries separately from
household waste at an official collection point
to ensure that these items are processed cor-
rectly. Information on returning these items is
available from the seller. Sellers are required
to accept these items free of charge.
Batteries and rechargeable batteries,
which are not permanently installed in
waste electrical devices, must be
removed prior to disposal and must be
disposed of separately. Lithium batteries and
battery packs in all systems must only be
retuned to a collection point when dis-
charged. Batteries must always be protected
against short circuits by covering the poles
with adhesive tape.
All end users are responsible for deleting any
personal data stored on waste devices prior
to their disposal.
Disposal of the packaging
The packaging consists of cardboard
and correspondingly marked plastics
that can be recycled.
– Make these materials available
for recycling.
Technical data
*) The specified values are emission values and do not necessarily
represent safe workplace values. Although there is a correlation
between emission and immission levels, this cannot be used to
infer whether additional safety measures are necessary or not.
Factors which affect the current immission levels at the work-
place, include the type of room, other sources of noise, e. g. the
number of machines operating and other processes taking place
in the vicinity. Permitted workplace values can differ from coun-
try to country. This information is designed to help the user to
better assess the dangers and risks. Determination of noise
emission values in accordance with EN 62841-1.
**) Special connection conditions according to EN 61000-3-11:
Only connect the device to a power supply with an impedance
less than or equal to Z
max
. Contact your electricity supplying
company if necessary.
Increased amount of flying
swarf
Dust bag full or inlet to dust
bag blocked.
Empty dust bag, clean out the
inlet with a brush or vacuum
cleaner.
Fault/malfunction Cause Remedy
Material number 107490
Rated voltage 230 V~, 50 Hz
Rated output 1450 W
Protection class II
Protection type IP20
Idling speed 5000 min
-1
Sound power level
(L
WA
)*
110 dB(A)
(K = 3 dB(A))
Sound pressure lev-
el (L
PA
)*
97 dB(A)
(K = 3 dB(A))
Saw blade dimen-
sions
ø210 mm
Permissible type of
saw blade
TCT
Mitre angle, horizon-
tal
-45–45°
Incline angle, verti-
cal
0–45°
Max. workpiece
cross-section
60 × 120 mm
(0°/90°)
34 × 120 mm
(45°/90°)
60 × 85 mm
(0°/45°)
34 × 85 mm
(45°/45°)
Dimensions 460 × 400 × 345 mm
Mains impedance
Z
max
**
0,413
Material number 107490
To Next Page
Loading...
Need help?
General
