CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Support: +49 (0)2831/91021-50
6.2 ConstruCam 3D
6.2.1 Installation
The software ConstruCAM 3D is a comprehensive CAD / CAM program. It works seamlessly with
the software WinPCNC.
ConstruCAM is available to download on our website.
http://www.cnc-step.de/images/attachments/Downloads/ConstruCam/ConstruCAM%2070340.zip
Save the download to your computer and unzip the archive file in any folder. The software must not
be installed.
To unlock the software we will send you the necessary instructions and the unlock code.
In our Preconfigured computers this is, of course, already done!
6.2.2 Interaction with WinPCNC
ConstruCAM 3D delivers the finished milling data directly to WinPCNC. For this purpose
WinPCNC must be open in any case! This function must be set up only once.
Click the Direktmill button and select "WinPCNC +DIN/ISO".
The program now requires the WinPCNC path. This is
normally found automatically and only needs to be confirmed.
Confirm once the WINPCNC.EXE and then the
WinPCNC.TMP.
For details please refer to the help files in ConstruCAM 3D.
To Next Page
Loading...
