CNC-Step T-Rex Series - Connection Panel Z-Axis

Quick Start Guide
T-Rex Series
CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 7
Support: +49 (0)2831/91021-50
15.01.2015
Panel Z-axis
1.3 Connection Panel Z-axis
At the Z-axis various connectivity options for optional accessories are available.
Note socket:
This socket can be connected to an external power supply, or alternative directly to the machine
control Zero-3.
Then there is the possibility to turn off the power by software. (see chapter 2.2)
EOT-2
Milling Motor 230V
HF-Spindle
TCM-3
TCT-1
Tangential tools
230V / max. 8A
Connect to Zero-3
Controller !
(see chapter 2.2)