Zero-3 / 5-Channel Motor Controller
CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Support: +49 (0)2831/91021-50
Zero-3 / 5-Channel Motor Controller
Brief description
The “Zero3“ controller contains all the electronic equipment required for operating the router with
up to four axes and up to five stepper motors. A PC with appropriate CNC controller software is
needed for commissioning. This User‘s Manual describes the installation, commissioning and
maintenance of the controller.
To Next Page
Loading...
