1 Introduction
The ADSL2+ Wireless Router is a high-speed ADSL2+ Ethernet/Wireless router that is
specifically designed to connect to the Internet and to directly connect to your local area
network(LAN) via high-speed 10/100 Mbps Ethernet, or wireless LAN (WLAN). The
ADSL2+ modem is compatible with the latest ADSL standards, including ADSL2 and
ADSL2+, and supports up to 24 Mbps downstream and 1.5Mbps upstream to deliver true
broadband speed and throughput. The DSL router supports wireless 802.11b/g and the
following security protocols: WEP, WPA, WPA2, and 802.1x. To ensure fully compatibility,
the DSL device was tested with all major DSLAMs, and support standard 10/100 Mbps
Base-T Ethernet interface Auto MDI/MDIx 10/100 Switch function allowing user easily to
link to PC or other Switches/Hubs. The DSL device is an idea solution for multi-users
utilizing build-in channel mode (PPPoE/A, IPoA, IPoE), IP routing, NAT functionalities
sharing the ADSL link. The DSL device is also a perfect solution for the residential users,
it supports the users with bridge mode in host based PPPoE Client.
Package Content
ADSL2+ Router * 1
Dedicated Power Adaptor
* 1
RJ-45 Ethernet cable
* 1
RJ-11 telephone cable
* 1
Installation CD * 1
Antenna * 1
Quick Installation Guide * 1
Warning!
Only use the power adapter provided in the package, otherwise it may cause
hardware damage.
Front Panel
Wireless b/g and four port ADSL2/2+ Router
To Next Page
Loading...
