Coaster 224401KW - Assembly Tips; Assembly Time; Parts Identification

ITEM:
224401KW
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
WARNING!
PARTS IDENTIFICATION
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME
30 MINUTES
PAGE 2 OF 8
COASTERFURNITURE.COM
Phillips head screw driver is required in the assembly process; however, manufacturer does not provided this item.
NOTE:
A
G
2PCS
H
4PCS
1PC
1PC
I
BED RAIL
(WITH “G” LABEL)
2PCS
BED RAIL SUPPORT LEG
BED RAIL SUPPORT
D
J 4PCS
FOOTBOARD PANEL
1PC
BED SLAT
E
K
8PCS
FOOTBOARD LEG
2PCS
BED SLAT SUPPORT
WITH LEVELER
F
BED RAIL
(WITH “F” LABEL)
2PCS
1PC
HEADBOARD PANEL
B
C
LEFT HEADBOARD LEG
(WITH “L” LABEL)
RIGHT HEADBOARD LEG
(WITH “R” LABEL)